This page is obsolete and retained for the Useful link and Download links only.

I’ve dived in and purchased a system from Hardware and Tare, for $650 (August 2006) which included a tripod for the dish and an Optus Aurora card.

The Homecast 150IR receiver that was part of the system has recently had a software upgrade, so the instructions provided by Vince at Hardware and Tare to setup the receiver were useless. Somehow I happened to stumble through and had the system working in around two hours, an hour or so putting it all together, and a further hour or so locating the satellite and then setting up the receiver.

Having set the system up a few times now, it usually takes less than five minutes to locate the signal from the satellite.

Dish Set Up Gallery

To minimise the number of connection points, we purchased a Mini Compact “Eze Eye” connection, drilled through the caravan wall and we connected directly to the decoder (see below). Click on any image below to view an enlarged image.

Useful Links

Satellite Dish Pointing Calculator for Australia and New Zealand using Google Maps to locate where you are. Double Click the map and all necessary elevation, azimuth and polarisation details are returned to assist in setting up your satellite TV system.

Downloads

The following files can be downloaded and provide information on the Optus C1 satellite.

Optus C1 Satellite Optus_C1_Satellite.pdf
244.0 KB 12600 Downloads Details...
Optus C1 Skews Optus_C1_skews.pdf
53.4 KB 972 Downloads Details...